< Faq Lists

FAQ

Before executing NVR recovery, users need to make your USB device as a boot disk.

At PC

[Step 1] Download FW image file (dual_rootfs.img) from:

(Note: Default recovery FW is FW6.1.0.76. User can update the FW after dual recovery.)

[Step 2] Copy FW image file (dual_rootfs.img) to the USB device that contains hk file.

At NVR

[Step 1] Plug in the USB to the USB port in front of the NVR.

[Step 2] Press and hold the backup button, and then power on the NVR until the system LED and backup LED

start flashing green. Then, release the backup button.

[Step 3] NVR will start to recover automatically.

[Step 4] After recovery process finishes, NVR will shutdown automatically.

[Step 5] NVR will shutdown automatically.

[Step 6] Plug out the USB and turn on NVR, and user can boot the NVR successfully.